Combi High Voltage ESS AQ-LITH® cabinet
The battery
The High Voltage ESS AQ-LITH® battery cabinet of 215 kWh contains 15 battery modules with CATL-cells (A-brand) with high cycle life. The battery cabinets are delivered as complete unit, no module assembly needed on the field. The cabinet has an airco-system, controlled by the temperature sensors on the cell, thus allowing an extended life time. The airco-system will heat the cabinet in case of freezing temperatures. Incl a fire surpression system. The battery cabinets can be placed in parallel to achieve a higher capacity.
Brand | AQ-LITH® based on CATL LFP-cells |
Technology | LiFePO4 (LFP) |
Capacity | 215 kWh |
Voltage | 768V |
Max. voltage | 864V |
Min. voltage | 648V |
Charge current | 0,5C |
Discharge current | 0,5C |
Operating temperature | -20 ~ 45°C |
Protection | IP55 – placement outside is allowed without shelter |
Weight | 2,2 tons (incl. inverters) |
Dimensions | 1600x1000x2150mm h (incl. airco & inverters) |
Warranty | 5 years defective warranty (10 years optional) 10 years performance warranty or 6000 cycles EOL 70% DOD 90% |
Expected life time | Design life 15 years, 8000 cycles |
Inverters
Each High Voltage ESS AQ-LITH® battery cabinet has its own PCS at the right side. The Enjoy 115 kW bidirectional inverter has been approved on the Synergrid list. The combi battery-PCS cabinet is delivered as a complete unit, no assembly needed. The system has no automatic grid decoupling device. The PCS needs an AQ-SMART® EMS to be functional. The PCS can be placed in parallel on AC side to increase the total capacity and power.
Brand | Enjoy |
Power | 115 kW |
Voltage range | 400V |
Frequency range | 50Hz |
Wiring | 3 phase + N |
Warranty | 5 years defective warranty |
STS | Excl. |
Applications
- Increased selfconsumption
- Opportunities in day-ahead prices
- Grid support (imbalance market)
- Peak shaving
- Power expansion in case of limited power access ( as EV charging stations)
- Back-up unit in case of grid breakdown
- Off-grid system (ex hybrid generator)
Installation
The concept of these cabinets allows a very fast installation. As preparation, a concrete base, power cable, grid decoupling device and ethernet connection need to be foreseen. The combi battery + PCS can be installed directly from truck to concrete base. An engineer from Battery Supplies will help to connect the battery modules and start up the system.
Transformer
The transformer unit is an optional unit but required for off-grid situations and backup-situations (in case of grid breakdown). The transformer unit is a seperat cabinet.
EMS
This battery can be controlled with the AQ-SMART® YUSO EMS. This EMS is used for increased self-consumption and dynamic prices. This controller is compatible with the YUSO-platform.In case of opportunities on the imbalance market, the battery will be used for support on the imbalance market and allows extra savings. To allow this function, a contract with YUSO as energy aggregator is required. Check if YUSO is active in your country.