New AQ-TRON® Waterproof chargers - AQ-TRON

AQ-TRON® Waterproof chargers

WP chargers chargeurs laders Waterproof waterdicht

Applications:

AQ-TRON^® Waterproof high frequency chargers

One profile : the correct charging curve is programmed in the factory and will avoid mistakes when assembled
Compatible charge curve for mostly all standard batteries.
- Version ‘WET’: compatible for the most Semi-Traction, Monoblocs and Deep-Cycles
- Version ‘SLA’: compatible for all AGM (DAB), gel (DGY) and lead carbon (DLC) batteries of Battery Supplies. Is also suitable for the most Li-ion LFP models as LIT/D drop-in and LIT/D-P marine batteries.
- Other profiles possible on demand
Operating Temperature: from -30°C to +65°C
Storage Temperature: from -40°C to +95°C
Humidity: from 5% to 95%
Altitude: up to 2000 mt
Protection Grade: IP67
V in = 180 – 264 V AC

Inclusive:

Battery temperature sensor : the temperature of the battery will influence the charging curve and will increase the safety of the charging process and life time of the battery
Remote charge indicator
Interlock safety system : will prevent the vehicle from starting when the battery charger is still connected to the grid.

IP67

On-board use

Safe and reliable

High efficiency

Ideal for every battery

Low batteries

Plug-n-play

PFC and Soft Start

Module 0

Module 1

Module 2

Module 3

Module 4

Module 5

Module 6

Module 7

Models

Every box of this AQ-TRON^® waterproof chargers was specifically developped based on the control card that it will host to allow an optimal heat dissipation also in extremely hot and humid environments. Severe tests were applied to guarantee a long-lasting duration over time.

Model	Voltage	Current	Power Supply	Battery Capacity Ah (C5)			Module	Dimensions (mm)
Model	Voltage	Current	Amp (A)	8h	10h	12h	Module	Dimensions (mm)
AQHF12-10 WP	12V	10A	2	80	100	120	0	187 x 105 x 72
AQHF12-15 WP		15A	2	120	150	180	1	187 x 123 x 62
AQHF12-20 WP		20A	2	160	200	240	1	187 x 123 x 62
AQHF12-25 WP		25A	2	200	250	300	2	210 x 128 x 77
AQHF24-5 WP	24V	5A	2	40	50	60	0	187 x 105 x 72
AQHF24-10 WP		10A	2	80	100	120	0	187 x 105 x 72
AQHF24-15 WP		15A	2	120	150	180	1	187 x 123 x 62
AQHF24-20 WP		20A	3	160	200	240	1	187 x 123 x 62
AQHF24-25 WP		25A	3	200	250	300	2	210 x 128 x 77
AQHF24-30 WP		30A	4	240	300	360	3	210 x 143 x 77
AQHF24-35 WP		35A	4	280	350	420	4	210 x 168 x 89
AQHF24-40 WP		40A	5	320	400	480	4	210 x 168 x 89
AQHF24-50 WP		50A	6	400	500	600	4	210 x 168 x 89
AQHF36-10 WP	36V	10A	2	80	100	120	2	210 x 128 x 77
AQHF36-15 WP		15A	2	120	150	180	2	210 x 128 x 77
AQHF36-20 WP		20A	4	160	200	240	2	210 x 128 x 77
AQHF36-25 WP		25A	5	200	250	300	2	210 x 128 x 77
AQHF36-30 WP		30A	6	240	300	360	3	210 x 143 x 77
AQHF36-50 WP		50A	9	400	500	600	5	315 x 200 x 160
AQHF48-12 WP	48V	12A	3	80	100	120	1	187 x 123 x 62
AQHF48-15 WP		15A	4	120	150	180	1	187 x 123 x 62
AQHF48-20 WP		20A	6	160	200	240	2	210 x 128 x 77
AQHF48-25 WP		25A	8	200	250	300	2	210 x 128 x 77
AQHF48-30 WP		30A	8	240	300	360	4	210 x 168 x 89
AQHF48-35 WP		35A	10	280	350	420	4	210 x 168 x 89
AQHF48-40 WP		40A	10	320	400	480	5	315 x 200 x 160
AQHF48-50 WP		50A	12	400	500	600	5	315 x 200 x 160
AQHF48-80 WP	48V / 400V	80A	18	450	560	750	7	419 x 270 x 110
AQHF72-20 WP	72V	20A	8	160	200	240	3	210 x 143 x 77
AQHF72-25 WP		25A	8	200	250	300	4	210 x 168 x 89
AQHF72-30 WP		30A	11	240	300	360	6	348 x 189 x 94
AQHF72-35 WP		35A	13	280	350	420	6	348 x 189 x 94

Each AQ-TRON^® charger available with SLA or WET profile. Other profiles possible on demand. If you wish to order a charger with a specific profile, you can put “SLA” or “WET” behind the reference. Example: AQHF48-25 WP WET.